Hixson Metal Finishing
Legal name: Hixson Companies Inc
Public FAA data last updated July 13, 2026
Request service from this repair station
Hixson Metal Finishing
FAA records identify Hixson Metal Finishing as a Part 145 repair station in Newport Beach, California, holding certificate OYYR040J. The station record includes ratings across the limited category.
Is this your repair station?
Claim the profile to add a logo, shop description, capabilities, and direct RFQ routing.
FAA record contacts
Bilateral agreements
No bilateral agreements on the FAA record.
Capabilities recorded by the FAA
These categories come directly from the published repair station dataset. Detailed aircraft and service capabilities should be confirmed with the station.
Limited
Ratings the FAA issues for a specific purpose, make, or model rather than a whole class of work.
- Non-destructive testing
- Non-destructive inspection, testing, and processing, using the specific methods named in the station's operations specifications.
- Specialized service
- A named specialized service, performed to the specification recorded in the station's operations specifications.
Class definitions are summarised from 14 CFR 145.59 (ratings) and 145.61 (limited ratings). A rating shows what the FAA has authorised the station to work on, not what it currently chooses to take on.
A Plus Avionics Corp.
Van Nuys, California
Abrasive Finishing Company
Gardena, California
Accurate Accessories, LLC.
Moreno Valley, California
Acl Airshop LLC
Gardena, California
Active Magnetic Inspection Inc
Sun Valley, California
Orange Coast Testing
Santa Ana, California
Questions about Hixson Metal Finishing
- Is Hixson Metal Finishing an FAA-certificated repair station?
- Yes. The FAA lists Hixson Metal Finishing as a certificated 14 CFR Part 145 repair station under certificate OYYR040J. This profile reflects the public FAA dataset as of July 13, 2026.
- What is Hixson Metal Finishing rated to work on?
- The FAA record lists ratings in the limited category. A rating shows what the FAA has authorised the station to work on, not what it currently chooses to take on.
- Does Hixson Metal Finishing hold approvals from authorities outside the United States?
- The FAA record lists no bilateral agreements for Hixson Metal Finishing. That does not rule out foreign approvals; confirm directly with the station.
- Where is Hixson Metal Finishing located?
- Hixson Metal Finishing is listed in Newport Beach, California. The FAA record for this station carries no street address, only the city and state.
- How do I request service from Hixson Metal Finishing?
- Start a request on this page and Virtual Hangar MX routes it to the station, or puts the same scope in front of other qualified Part 145 shops so you can compare. There is no charge to send a request.
- Is this profile managed by Hixson Metal Finishing?
- Not yet. This profile was generated from the public FAA Part 145 dataset. Anyone at the station can claim it free of charge to correct the record, add capabilities and a website, and receive requests directly.
Need maintenance support for your aircraft?
Request service from this station or send the same scope to other qualified Part 145 shops through Virtual Hangar.
This profile is based on the public FAA 14 CFR Part 145 repair station dataset (snapshot of July 13, 2026) and has not yet been claimed by the repair station. Ratings, approvals, and contact information should be confirmed directly before engaging the station. Work here? Claim this profile.