Machining Technology Services Inc
Public FAA data last updated July 13, 2026
Request service from this repair station
Machining Technology Services Inc
FAA records identify Machining Technology Services Inc as a Part 145 repair station in Monroe, North Carolina, holding certificate 9B7R885C. The station record includes ratings across the accessory category.
Is this your repair station?
Claim the profile to add a logo, shop description, capabilities, and direct RFQ routing.
FAA record contacts
Capabilities recorded by the FAA
These categories come directly from the published repair station dataset. Detailed aircraft and service capabilities should be confirmed with the station.
Accessory
Work on aircraft accessories, split by whether they are mechanical, electrical, or electronic.
- Limited
- Confined to the particular makes and models named in the station's operations specifications, rather than the full class.
Class definitions are summarised from 14 CFR 145.59 (ratings) and 145.61 (limited ratings). A rating shows what the FAA has authorised the station to work on, not what it currently chooses to take on.
Aircraft Reconfig Technologies
Greensboro, North Carolina
Aero Accessories, LLC.
Burlington, North Carolina
Aeroservices - Rdu
Sanford, North Carolina
Aeroteams Managed Aviation Solutions
Greensboro, North Carolina
Air Care Inc
Elm City, North Carolina
Aircraft Belts Inc
Creedmoor, North Carolina
Questions about Machining Technology Services Inc
- Is Machining Technology Services Inc an FAA-certificated repair station?
- Yes. The FAA lists Machining Technology Services Inc as a certificated 14 CFR Part 145 repair station under certificate 9B7R885C. This profile reflects the public FAA dataset as of July 13, 2026.
- What is Machining Technology Services Inc rated to work on?
- The FAA record lists ratings in the accessory category. A rating shows what the FAA has authorised the station to work on, not what it currently chooses to take on.
- Does Machining Technology Services Inc hold approvals from authorities outside the United States?
- The FAA record lists EASA. Under a bilateral aviation safety agreement, that authority accepts work performed by this station within the scope of the agreement.
- Where is Machining Technology Services Inc located?
- Machining Technology Services Inc is listed in Monroe, North Carolina. The FAA record for this station carries no street address, only the city and state.
- How do I request service from Machining Technology Services Inc?
- Start a request on this page and Virtual Hangar MX routes it to the station, or puts the same scope in front of other qualified Part 145 shops so you can compare. There is no charge to send a request.
- Is this profile managed by Machining Technology Services Inc?
- Not yet. This profile was generated from the public FAA Part 145 dataset. Anyone at the station can claim it free of charge to correct the record, add capabilities and a website, and receive requests directly.
Need maintenance support for your aircraft?
Request service from this station or send the same scope to other qualified Part 145 shops through Virtual Hangar.
This profile is based on the public FAA 14 CFR Part 145 repair station dataset (snapshot of July 13, 2026) and has not yet been claimed by the repair station. Ratings, approvals, and contact information should be confirmed directly before engaging the station. Work here? Claim this profile.