Micro-Surface Finishing Products Inc
Public FAA data last updated July 13, 2026
Request service from this repair station
Micro-Surface Finishing Products Inc
FAA records identify Micro-Surface Finishing Products Inc as a Part 145 repair station in Wilton, Iowa, holding certificate KY2R969K. The station record includes ratings across the limited category.
Is this your repair station?
Claim the profile to add a logo, shop description, capabilities, and direct RFQ routing.
FAA record contacts
Bilateral agreements
No bilateral agreements on the FAA record.
Capabilities recorded by the FAA
These categories come directly from the published repair station dataset. Detailed aircraft and service capabilities should be confirmed with the station.
Limited
Ratings the FAA issues for a specific purpose, make, or model rather than a whole class of work.
- Specialized service
- A named specialized service, performed to the specification recorded in the station's operations specifications.
Class definitions are summarised from 14 CFR 145.59 (ratings) and 145.61 (limited ratings). A rating shows what the FAA has authorised the station to work on, not what it currently chooses to take on.
1 Vision Aviation
Sioux City, Iowa
1 Vision General Aviation, LLC
Sioux City, Iowa
Aerospace Control Products Inc
Davenport, Iowa
Arn-Air
Bayard, Iowa
Blue Skies Over Dubuque Inc
Dubuque, Iowa
Revv Aviation
Council Bluffs, Iowa
Questions about Micro-Surface Finishing Products Inc
- Is Micro-Surface Finishing Products Inc an FAA-certificated repair station?
- Yes. The FAA lists Micro-Surface Finishing Products Inc as a certificated 14 CFR Part 145 repair station under certificate KY2R969K. This profile reflects the public FAA dataset as of July 13, 2026.
- What is Micro-Surface Finishing Products Inc rated to work on?
- The FAA record lists ratings in the limited category. A rating shows what the FAA has authorised the station to work on, not what it currently chooses to take on.
- Does Micro-Surface Finishing Products Inc hold approvals from authorities outside the United States?
- The FAA record lists no bilateral agreements for Micro-Surface Finishing Products Inc. That does not rule out foreign approvals; confirm directly with the station.
- Where is Micro-Surface Finishing Products Inc located?
- Micro-Surface Finishing Products Inc is listed in Wilton, Iowa. The FAA record for this station carries no street address, only the city and state.
- How do I request service from Micro-Surface Finishing Products Inc?
- Start a request on this page and Virtual Hangar MX routes it to the station, or puts the same scope in front of other qualified Part 145 shops so you can compare. There is no charge to send a request.
- Is this profile managed by Micro-Surface Finishing Products Inc?
- Not yet. This profile was generated from the public FAA Part 145 dataset. Anyone at the station can claim it free of charge to correct the record, add capabilities and a website, and receive requests directly.
Need maintenance support for your aircraft?
Request service from this station or send the same scope to other qualified Part 145 shops through Virtual Hangar.
This profile is based on the public FAA 14 CFR Part 145 repair station dataset (snapshot of July 13, 2026) and has not yet been claimed by the repair station. Ratings, approvals, and contact information should be confirmed directly before engaging the station. Work here? Claim this profile.