Nc Servo Technology Corporation
Public FAA data last updated July 13, 2026
Request service from this repair station
Nc Servo Technology Corporation
FAA records identify Nc Servo Technology Corporation as a Part 145 repair station in Westland, Michigan, holding certificate NSY2743K. The station record includes ratings across the accessory category.
Is this your repair station?
Claim the profile to add a logo, shop description, capabilities, and direct RFQ routing.
FAA record contacts
Bilateral agreements
No bilateral agreements on the FAA record.
Capabilities recorded by the FAA
These categories come directly from the published repair station dataset. Detailed aircraft and service capabilities should be confirmed with the station.
Accessory
Work on aircraft accessories, split by whether they are mechanical, electrical, or electronic.
- Limited
- Confined to the particular makes and models named in the station's operations specifications, rather than the full class.
Class definitions are summarised from 14 CFR 145.59 (ratings) and 145.61 (limited ratings). A rating shows what the FAA has authorised the station to work on, not what it currently chooses to take on.
Acron Aviation Inc
Grand Rapids, Michigan
Acss Repair And Overhaul
Grand Rapids, Michigan
Aerofixica
Dexter, Michigan
Aerospace Services And Products, Inc
Hudson, Michigan
Atac Inc.
Milford, Michigan
Aircraft Inspection Services Inc
Grand Rapids, Michigan
Questions about Nc Servo Technology Corporation
- Is Nc Servo Technology Corporation an FAA-certificated repair station?
- Yes. The FAA lists Nc Servo Technology Corporation as a certificated 14 CFR Part 145 repair station under certificate NSY2743K. This profile reflects the public FAA dataset as of July 13, 2026.
- What is Nc Servo Technology Corporation rated to work on?
- The FAA record lists ratings in the accessory category. A rating shows what the FAA has authorised the station to work on, not what it currently chooses to take on.
- Does Nc Servo Technology Corporation hold approvals from authorities outside the United States?
- The FAA record lists no bilateral agreements for Nc Servo Technology Corporation. That does not rule out foreign approvals; confirm directly with the station.
- Where is Nc Servo Technology Corporation located?
- Nc Servo Technology Corporation is listed in Westland, Michigan. The FAA record for this station carries no street address, only the city and state.
- How do I request service from Nc Servo Technology Corporation?
- Start a request on this page and Virtual Hangar MX routes it to the station, or puts the same scope in front of other qualified Part 145 shops so you can compare. There is no charge to send a request.
- Is this profile managed by Nc Servo Technology Corporation?
- Not yet. This profile was generated from the public FAA Part 145 dataset. Anyone at the station can claim it free of charge to correct the record, add capabilities and a website, and receive requests directly.
Need maintenance support for your aircraft?
Request service from this station or send the same scope to other qualified Part 145 shops through Virtual Hangar.
This profile is based on the public FAA 14 CFR Part 145 repair station dataset (snapshot of July 13, 2026) and has not yet been claimed by the repair station. Ratings, approvals, and contact information should be confirmed directly before engaging the station. Work here? Claim this profile.