Ontic Engineering And Manufacturing Inc
Public FAA data last updated July 13, 2026
Request service from this repair station
Ontic Engineering And Manufacturing Inc
FAA records identify Ontic Engineering And Manufacturing Inc as a Part 145 repair station in Chatsworth, California, holding certificate OE6R225J. The station record includes ratings across the radio and instrument categories.
Is this your repair station?
Claim the profile to add a logo, shop description, capabilities, and direct RFQ routing.
FAA record contacts
Bilateral agreements
- EASA
- United Kingdom
Browse other Part 145 stations with EASA approval or UK CAA approval .
Capabilities recorded by the FAA
These categories come directly from the published repair station dataset. Detailed aircraft and service capabilities should be confirmed with the station.
Radio
Work on communication, navigation, and radar equipment.
- Limited
- Confined to the particular makes and models named in the station's operations specifications, rather than the full class.
Instrument
Work on flight and engine instruments, split by how the instrument operates.
- Limited
- Confined to the particular makes and models named in the station's operations specifications, rather than the full class.
Class definitions are summarised from 14 CFR 145.59 (ratings) and 145.61 (limited ratings). A rating shows what the FAA has authorised the station to work on, not what it currently chooses to take on.
A Plus Avionics Corp.
Van Nuys, California
Abrasive Finishing Company
Gardena, California
Accurate Accessories, LLC.
Moreno Valley, California
Acl Airshop LLC
Gardena, California
Active Magnetic Inspection Inc
Sun Valley, California
Orange Coast Testing
Santa Ana, California
Questions about Ontic Engineering And Manufacturing Inc
- Is Ontic Engineering And Manufacturing Inc an FAA-certificated repair station?
- Yes. The FAA lists Ontic Engineering And Manufacturing Inc as a certificated 14 CFR Part 145 repair station under certificate OE6R225J. This profile reflects the public FAA dataset as of July 13, 2026.
- What is Ontic Engineering And Manufacturing Inc rated to work on?
- The FAA record lists ratings in the radio and instrument categories. A rating shows what the FAA has authorised the station to work on, not what it currently chooses to take on.
- Does Ontic Engineering And Manufacturing Inc hold approvals from authorities outside the United States?
- The FAA record lists EASA and United Kingdom. Under a bilateral aviation safety agreement, that authority accepts work performed by this station within the scope of the agreement.
- Where is Ontic Engineering And Manufacturing Inc located?
- Ontic Engineering And Manufacturing Inc is listed in Chatsworth, California. The FAA record for this station carries no street address, only the city and state.
- How do I request service from Ontic Engineering And Manufacturing Inc?
- Start a request on this page and Virtual Hangar MX routes it to the station, or puts the same scope in front of other qualified Part 145 shops so you can compare. There is no charge to send a request.
- Is this profile managed by Ontic Engineering And Manufacturing Inc?
- Not yet. This profile was generated from the public FAA Part 145 dataset. Anyone at the station can claim it free of charge to correct the record, add capabilities and a website, and receive requests directly.
Need maintenance support for your aircraft?
Request service from this station or send the same scope to other qualified Part 145 shops through Virtual Hangar.
This profile is based on the public FAA 14 CFR Part 145 repair station dataset (snapshot of July 13, 2026) and has not yet been claimed by the repair station. Ratings, approvals, and contact information should be confirmed directly before engaging the station. Work here? Claim this profile.