Precision Metal Finishing Inc
Public FAA data last updated July 13, 2026
Request service from this repair station
Precision Metal Finishing Inc
FAA records identify Precision Metal Finishing Inc as a Part 145 repair station in Canby, Oregon, holding certificate P13R413N. The station record includes ratings across the limited category.
Is this your repair station?
Claim the profile to add a logo, shop description, capabilities, and direct RFQ routing.
FAA record contacts
Bilateral agreements
No bilateral agreements on the FAA record.
Capabilities recorded by the FAA
These categories come directly from the published repair station dataset. Detailed aircraft and service capabilities should be confirmed with the station.
Limited
Ratings the FAA issues for a specific purpose, make, or model rather than a whole class of work.
- Specialized service
- A named specialized service, performed to the specification recorded in the station's operations specifications.
Class definitions are summarised from 14 CFR 145.59 (ratings) and 145.61 (limited ratings). A rating shows what the FAA has authorised the station to work on, not what it currently chooses to take on.
Advanced Surfaces And Process Inc
Cornelius, Oregon
Aero Air LLC
Hillsboro, Oregon
Air Sense Avionics Inc
Scappoose, Oregon
Flightcraft
Portland, Oregon
Avid Avionics LLC
Salem, Oregon
Baker Avionics LLC
Grants Pass, Oregon
Questions about Precision Metal Finishing Inc
- Is Precision Metal Finishing Inc an FAA-certificated repair station?
- Yes. The FAA lists Precision Metal Finishing Inc as a certificated 14 CFR Part 145 repair station under certificate P13R413N. This profile reflects the public FAA dataset as of July 13, 2026.
- What is Precision Metal Finishing Inc rated to work on?
- The FAA record lists ratings in the limited category. A rating shows what the FAA has authorised the station to work on, not what it currently chooses to take on.
- Does Precision Metal Finishing Inc hold approvals from authorities outside the United States?
- The FAA record lists no bilateral agreements for Precision Metal Finishing Inc. That does not rule out foreign approvals; confirm directly with the station.
- Where is Precision Metal Finishing Inc located?
- Precision Metal Finishing Inc is listed in Canby, Oregon. The FAA record for this station carries no street address, only the city and state.
- How do I request service from Precision Metal Finishing Inc?
- Start a request on this page and Virtual Hangar MX routes it to the station, or puts the same scope in front of other qualified Part 145 shops so you can compare. There is no charge to send a request.
- Is this profile managed by Precision Metal Finishing Inc?
- Not yet. This profile was generated from the public FAA Part 145 dataset. Anyone at the station can claim it free of charge to correct the record, add capabilities and a website, and receive requests directly.
Need maintenance support for your aircraft?
Request service from this station or send the same scope to other qualified Part 145 shops through Virtual Hangar.
This profile is based on the public FAA 14 CFR Part 145 repair station dataset (snapshot of July 13, 2026) and has not yet been claimed by the repair station. Ratings, approvals, and contact information should be confirmed directly before engaging the station. Work here? Claim this profile.